Arduino Wolves Config Tool Chrome Extension

A configuration tool for arduino wolves.
arduino wolves config tool is a small panel to ease the configuration of Arduino Wolves, an interactive wood pane part of the exhibition "Loups" of the Musée d'histoire naturelle de fribourg (MHN).

How to use:

1. connect the Arduino to your computer;

2. open the app;

3. select the correct port in the dropdown (usually /dev/ttyUSBx ou /dev/ttyACMx);

4. click on "connect";

5. configure the arduino as you see fit;

6. click on "apply";

7. click on "disconnect".

The different parameters are:

- PIN: code used to enter config mode through the remote control.

- DF: time between the detection of the RFID card and the trigger of the solenoid.

- DI: duration of the solenoid impulse.

- colors: colors of the blinking leds when they are idle (no feedback).

Developed by Jacques Supcik, Lucy Linder and Damin Goetschi (the BlueMasters).

- delays: configuration of the blinking (use off=-1 to disable blinking).

How to install Arduino Wolves Config Tool chrome extension in chrome Browser

You can Follow the below Step By Step procedure to install the Arduino Wolves Config Tool Chrome Extension to your Chrome Web browser.

• Step 1: Go to the Chrome webstore https://chrome.google.com/webstore or download the extension Arduino Wolves Config Tool Chrome Extension Download from https://pluginsaddonsextensions.com
• Step 2: Now search for the Arduino Wolves Config Tool in Chrome Webstore Search and click on the search button.
• Step 3: click on the Arduino Wolves Config Tool Chrome Extension Link
• Step 4: in the next page click on the Add to Chrome button to Download and Install the Arduino Wolves Config Tool extension for your Chrome Web browser .